Savage Solder: First manual AVC ramp jump

Today we took Savage Solder out to take some calibration image data of the various Sparkfun AVC obstacles and to experiment with manual navigation through an AVC style course. Unfortunately, we had some electronics failures with our replacement ESC that will take some repair. Before that though, we managed to collect a fair amount of useful data, and did a few jumps off the ramp. While not impossible, it looks to be pretty challenging. For small cars, the end of the ramp is actually pretty high. For large cars, the ramp is surprisingly narrow and was not trivial to hit when driving manually. This video is of the slowest run we dared do, higher speeds made better landings.